News

Nail Led lamp and lamp led lamp difference

  • Release date:22-01-2018
  • Abst:

    1, Environmental protection, ordinary nail lamp is used […]

    1, Environmental protection, ordinary nail lamp is used UV lamp, and LED is a semiconductor light-emitting device, there is no human body harmful substances, but because of small size, will not be broken, easy to handle waste.
    2, Energy-saving, LED is a low-power devices, the actual power consumption is very small, such as 2.5W products and the original 14W is almost, so very power-saving.
    3, Safety, will not be hot, the original ordinary nail lights, customers are not careful when it is easy to hot, because the lamp produces a lot of heat in the light, the general temperature of 50-70 degrees, and some products to more than 80 Degree, once the human hand hit the lamp, it will burn, and LED is a cold light source, when used without fever, even if the user to touch, it does not matter.
    4, Long service life, ordinary nail lamp lamp life of 3000-5000 hours, and some lamp less than 3000 hours, so often change the lamp, more trouble, but also increased the cost of use, and the LED's Life expectancy is generally 35,000 hours, short use up to 50,000 hours or more, do not need to change the lamp so often trouble, saving the cost of use.
    5, easy to carry, ordinary nail lamp due to the use of the lamp, is fragile, easy to damage the lamp when carrying, and LED is a solid material, will not be damaged as a result of carrying.
    6, Save time, the product uses LED nail glue, dry solid time of about 30 seconds, while ordinary nail light dry solid time of 2 minutes to 3 minutes, greatly saving working hours.

    http://www.kangtuonail.com