News

Nail lamp uv baking lamp and led baking lamp difference

  • Release date:18-07-2017
  • Abst:

    1, environmental protection, ordinary nail lamp is used […]

    1, environmental protection, ordinary nail lamp is used in ultraviolet light, and LED is a semiconductor light-emitting devices, no harmful substances, but because of small size, not broken, easy to handle waste.
    2, energy saving, LED is a low-power devices, the actual power consumption is very small, such as 2.5W products and the original 14W almost, so very energy efficient.
    3, safe, not hot, the original ordinary nail lights, customers are not careful when used very easy to hot, because the lamp in the light when the high heat generated, the general temperature of 50-70 degrees, and some products to more than 80 Degree, once the human hand hit the lamp, it will burn, and LED is cold light source, when used without heat, even if the user to touch, it does not matter.
    4, long life, ordinary nail lamp lamp life of the general 3000-5000 hours, and some tubes less than 3000 hours, so often for the lamp, more trouble, but also increase the use of cost, and LED Life is generally 35,000 hours, the use of up to 50,000 hours or more, do not often need to change the lamp so much trouble, saving the use of cost.
    5, easy to carry, ordinary nail lamp as a result of the use of the lamp, is fragile, easy to damage the lamp when carrying, and LED is a solid material, not because of damage and damage.
    6, save time, this product uses LED nail glue, dry time for about 30 seconds, while the ordinary nail light dry time for 2 minutes to 3 minutes, significant savings in working hours.http://www.kangtuonail.com